Rust Proof Cleaning Agent

This Rust Proof Cleaning Agent is refined from high-quality international raw materials and can quickly remove gum, oil stains, dirt, and oxide deposits from carburetors, air dampers, electronic injection systems, and various mechanical parts. Restore optimal condition and efficiency, extend the service life of mechanical components. This Rust Proof Cleaning Agent is a non-destructive oxygen sensor component.

Usage

Remove the matching extension hose, insert it into the nozzle hole, align it with the area to be cleaned, and press the nozzle.

When cleaning the carburetor:

1. After starting the engine for 5-10 minutes, remove the air filter and remove the filter element that filters the air.

2. Spray carburetor cleaning agent into the interior of the carburetor while increasing the engine speed to over 5000 rpm.

3. The dirt and carbon deposits inside the carburetor will burn in the combustion chamber and be cleaned before being discharged from the vehicle through the exhaust pipe.

4. Turn off the engine and install the air filter.

Special Reminder

1.Do not store in a temperature higher than 49℃ or near a fire source. It is strictly prohibited to puncture the can body.

2.Pay attention to protection during spraying. If you accidentally come into contact with eyes and skin, rinse immediately with water or seek medical attention as appropriate.

3.Far away from children's reach

4.Should be used in a well ventilated environment

CARBURETOR ANTI RUST CLEANING AGENT

Main components: solvents, rust inhibitors, and projectiles

Warning

Dangerous Statement

Flammable liquids and vapors, ingested and entering the respiratory tract, may be harmful, toxic to aquatic organisms, and have long-lasting effects.

[Preventive measure]

1.Far away from sources of fire and heat.

2.It should be stored and transported separately from oxidants and edible chemicals.

3.Take measures to prevent static electricity, containers and receiving equipment

4.Grounding and connection.

5.Use explosion-proof electrical appliances, ventilation, lighting, and other equipment.

6.Wear protective gloves, goggles, and face shields.

7.Thoroughly clean the body contact area after operation.

8.No eating, drinking, or smoking allowed in the workplace

[Accident Response]

1.If in contact with skin (or hair): immediately remove the affected area polluting clothing, rinse with soapy water and clean water.

2.Ingestion: Drink plenty of warm water, induce vomiting, seek medical attention, avoid use adrenaline.

3.Collect leaks.

4.In case of fire, dry powder, foam, carbon dioxide sand extinguishing

[Safe Storage]

Store in a cool and well ventilated place. Locked storage

[Waste Disposal]

Dispose of waste, pollutants, and empty containers in accordance with national/local regulations

National Chemical Accident Emergency Consultation Hotline:0532-83889090

Executive standard: BB/T 0047

Production date: see can bottom

Validity period: Three years . Qualified inspection