Hardware and Electromechanical Rust Prevention Cleaning Agent

Chisboom Hardware and Electromechanical Rust Prevention Cleaning Agent is a brand new product, and the VOC content of the cleaning agent meets the fundamental GB standards 38508 Volatile Organic Compound Restriction Requirements, specifically developed for hardware and electromechanical applications, to remove oil stains and keep them in good condition. This Hardware and Electromechanical Rust Prevention Cleaning Agent is widely used for workpiece cleaning in the hardware and electromechanical field, such as motors, cutting tools, fixtures, machine tool accessories, transmission components, compressors, seals, bearings, etc.

Usage

Shake well before use, and then spray directly onto the surface of the object that needs to be cleaned.

Special Reminder

1.Do not store in a temperature higher than 49℃ or near a fire source. It is strictly prohibited to puncture the can body.

2.Pay attention to protection during spraying. If you accidentally come into contact with eyes and skin, rinse immediately with water or seek medical attention as appropriate.

3.Far away from children's reach

4.Hardware and Electromechanical Rust Prevention Cleaning Agent should be used in a well ventilated environment

ELECTROMECHANICAL EQUIPMENT CLEANING SPRAY

Main components： Resin Pigments Solvents Projective agent.

Warning

Dangerous Statement

Flammable liquids and vapors, ingested and entering the respiratory tract, may be harmful, toxic to aquatic organisms, and have long-lasting effects.

[Preventive measure]

1.Far away from sources of fire and heat.

2.It should be stored and transported separately from oxidants and edible chemicals.

3.Take measures to prevent static electricity, containers and receiving equipment

4.Grounding and connection.

5.Use explosion-proof electrical appliances, ventilation, lighting, and other equipment.

6.Wear protective gloves, goggles, and face shields.

7.Thoroughly clean the body contact area after operation.

8.No eating, drinking, or smoking allowed in the workplace

[Accident Response]

1.If in contact with skin (or hair): immediately remove the affected area polluting clothing, rinse with soapy water and clean water.

2.Ingestion: Drink plenty of warm water, induce vomiting, seek medical attention, avoid use adrenaline.

3.Collect leaks.

4.In case of fire, dry powder, foam, carbon dioxide sand extinguishing

[Safe Storage]

Store in a cool and well ventilated place. Locked storage

[Waste Disposal]

Dispose of waste, pollutants, and empty containers in accordance with national/local regulations

National Chemical Accident Emergency Consultation Hotline:0532-83889090

Executive standard: BB/T 0047

Production date: see can bottom

Validity period: Three years . Qualified inspection