Wall Repair Paint

This Wall Repair Paint is made of international high quality water-based acrylic emulsion, bowl white powder, filling pigment, environmental protection additives and deionized water. The construction is simple, fast and versatile, and can be widely used in residential, school, office building, hotel and other buildings interior wall, ceiling, gypsum board and wood interval decoration repair and renovation painting, especially suitable for small area spraying and repair.

Usage

1.Handle the substrate well. If there is deep dirt on the wall, please gently polish it with sandpaper and clean the surface dust.

2.Before spraying, shake the can up and down for about two minutes until the paint is fully mixed.

3.About 15-30 cm away from the surface of the sprayed object, use your index finger to press down the nozzle and spray back and forth at a constant speed.

4.Generally sprayed 2-3 times, thickness 20-30mm, about 8 minutes dry, in 24 hours.

5.If a small amount of paint cannot be sprayed, rotate the nozzle 180° before spraying.

6.If the Wall Repair Paint is not finished, the paint can is turned upside down before storage, and the nozzle is pressed down for about 3 seconds to clean up the residual paint of the nozzle to prevent plugging.

Special Reminder

1.Do not store in a temperature higher than 49℃ or near a fire source. It is strictly prohibited to puncture the can body.

2.Pay attention to protection during spraying. If you accidentally come into contact with eyes and skin, rinse immediately with water or seek medical attention as appropriate.

3.Far away from children's reach

4.Should be used in a well ventilated environment