Grease Spray

Chisboom high-temperature resistant butter spray(grease spray) not only has inherent anti-wear, noise reduction, lubrication, and rust prevention effects, but also has a high-temperature resistance performance of up to 200 ° C. When it is necessary to timely lubricate the hot metal components after high-speed operation and friction, there is no need to wait for the metal components to cool down. Simply spray butter spray on the friction surface of the hot metal components, which greatly saves construction time and improves work efficiency. This Grease Spray is suitable for lubrication and rust prevention of transmission components such as bearings, gears, cams, guide rails, and chains used under high temperature conditions. Grease Spray has excellent lubrication and load-bearing capacity, and is not prone to wear and tear. It effectively eliminates noise, prolongs the service life of workpieces, and reduces friction and wear. This product has strong adhesion on the surface of the workpiece, effectively isolating the contact between air, moisture, and metal workpieces for a long time protect the workpiece from moisture and rust.

Usage

Shake well before use. Insert the nozzle into the button, directly align Grease Spray with the surface of the workpiece to be lubricated, and spray. Run the equipment at low speed to evenly spread the lubricating grease on the surface of the workpiece.

Special Reminder

1.Do not store in a temperature higher than 49℃ or near a fire source. It is strictly prohibited to puncture the can body.

2.Pay attention to protection during spraying. If you accidentally come into contact with eyes and skin, rinse immediately with water or seek medical attention as appropriate.

3.Far away from children's reach

4.Should be used in a well ventilated environment.

BUTTER SPRAY

Main components：Lubricating grease, rust inhibitor, and propellant.

Warning

Dangerous Statement

Flammable liquids and vapors, ingested and entering the respiratory tract, may be harmful, toxic to aquatic organisms, and have long-lasting effects.

[Preventive measure]

1.Far away from sources of fire and heat.

2.It should be stored and transported separately from oxidants and edible chemicals.

3.Take measures to prevent static electricity, containers and receiving equipment

4.Grounding and connection.

5.Use explosion-proof electrical appliances, ventilation, lighting, and other equipment.

6.Wear protective gloves, goggles, and face shields.

7.Thoroughly clean the body contact area after operation.

8.No eating, drinking, or smoking allowed in the workplace

[Accident Response]

1.If in contact with skin (or hair): immediately remove the affected area polluting clothing, rinse with soapy water and clean water.

2.Ingestion: Drink plenty of warm water, induce vomiting, seek medical attention, avoid use adrenaline.

3.Collect leaks.

4.In case of fire, dry powder, foam, carbon dioxide sand extinguishing

[Safe Storage]

Store in a cool and well ventilated place. Locked storage

[Waste Disposal]

Dispose of waste, pollutants, and empty containers in accordance with national/local regulations

National Chemical Accident Emergency Consultation Hotline:0532-83889090

Executive standard: BB/T 0047

Production date: see can bottom

Validity period: Three years . Qualified inspection