Colored Aerosol Auto-Spray Paint

This Chisboom Colored Aerosol Auto-Spray Paint falls under the category of daytime fluorescent aerosol paint, distinct from both luminescent and reflective paints. It maximizes the reflection of fluorescent light during daylight hours, enhancing color vibrancy beyond standard hues. With its user-friendly application, flexible properties, and superior atomization, it boasts a high spray rate for efficient use. The resulting paint film exhibits outstanding hardness, adhesion, and impact resistance, ensuring durability and protection.

Usage

1.Prior to application, ensure the surface is thoroughly cleaned of grease, wax, and dust to promote optimal adhesion.

2.Before painting, vigorously shake the can for approximately one minute to achieve a fully mixed and even consistency of the paint.

3.Begin by spraying a small area on a test board to confirm the accuracy of the selected color.

4.Maintain a distance of approximately 15-20 centimeters from the surface being sprayed. Depress the nozzle with your index finger and apply the paint in smooth, uniform strokes.

5.Employ a multi-spraying technique for optimal results. Apply a thin layer every three minutes, rather than completing the entire application at once.

6.If there is remaining paint that cannot be sprayed, rotate the nozzle 180° before continuing spraying.

7.To prevent nozzle blockage, if the paint is not fully dispensed in one application, invert the can before storing. Press the nozzle for approximately 3 seconds to release any remaining paint, and clean the nozzle thoroughly.

Special Reminder

Store the product in an environment with temperatures not exceeding 49°C and keep it away from sources of heat or fire. Puncturing the can body is strictly prohibited.

Take precautions during spraying. In case of accidental contact with eyes or skin, rinse immediately with water or seek appropriate medical attention.

Keep the product out of reach of children.

Ensure usage in a well-ventilated environment.

Main components：

Organic resins, pigments, organic solvents, and projectiles

Warning

Dangerous Statement

Flammable liquids and vapors, ingested and entering the respiratory tract, may be harmful, toxic to aquatic organisms, and have long-lasting effects.

[Preventive measure]

1.Far away from sources of fire and heat.

2.It should be stored and transported separately from oxidants and edible chemicals.

3.Take measures to prevent static electricity, containers and receiving equipment

4.Grounding and connection.

5.Use explosion-proof electrical appliances, ventilation, lighting, and other equipment.

6.Wear protective gloves, goggles, and face shields.

7.Thoroughly clean the body contact area after operation.

8.No eating, drinking, or smoking allowed in the workplace

[Accident Response]

1.If in contact with skin (or hair): immediately remove the affected area polluting clothing, rinse with soapy water and clean water.

2.Ingestion: Drink plenty of warm water, induce vomiting, seek medical attention, avoid use adrenaline.

3.Collect leaks.

4.In case of fire, dry powder, foam, carbon dioxide sand extinguishing

[Safe Storage]

Store in a cool and well ventilated place. Locked storage

[Waste Disposal]

Dispose of waste, pollutants, and empty containers in accordance with national/local regulations

National Chemical Accident Emergency Consultation Hotline:0532-83889090

Executive standard: BB/T 0047

Production date: see can bottom

Validity period: Three years . Qualified inspection