Circuit Board Protective Paint

Chisboom circuit board protective paint is a transparent acrylic based protective paint that can be used as a three proof paint for printed circuit boards, providing moisture, dust, and salt spray protection. At the same time, Circuit Board Protective Paint also prevents leakage and short circuits to extend the service life of the equipment.

Usage

1. Before use, turn off the power supply of the equipment and let it cool down. Do not use it on live equipment.

When the spraying temperature is higher than 15 ° C, good results can be achieved. Before coating, please ensure that the surface is clean, dry, and free of moisture.

3. Please spray the circuit board protective paint evenly on the area to be coated at a distance of 30cm from the object to be coated, and do not apply it too thick.

4. Allow 30 minutes of drying time between each coating to facilitate coating overlap.

5. After spraying, invert the tank body and press the nozzle until only propellant is sprayed to clean the valve and avoid blockage.

Special Reminder

1.Do not store in a temperature higher than 49℃ or near a fire source. It is strictly prohibited to puncture the can body.

2.Pay attention to protection during spraying. If you accidentally come into contact with eyes and skin, rinse immediately with water or seek medical attention as appropriate.

3.Far away from children's reach

4.Circuit Board Protective Paint should be used in a well ventilated environment

THREE PROOF PAINT PCB PROTECTIVE PAINT

Main components：Organic resin, organic solvent, propellant

Warning

Dangerous Statement

Flammable liquids and vapors, ingested and entering the respiratory tract, may be harmful, toxic to aquatic organisms, and have long-lasting effects.

[Preventive measure]

1.Far away from sources of fire and heat.

2.It should be stored and transported separately from oxidants and edible chemicals.

3.Take measures to prevent static electricity, containers and receiving equipment

4.Grounding and connection.

5.Use explosion-proof electrical appliances, ventilation, lighting, and other equipment.

6.Wear protective gloves, goggles, and face shields.

7.Thoroughly clean the body contact area after operation.

8.No eating, drinking, or smoking allowed in the workplace

[Accident Response]

1.If in contact with skin (or hair): immediately remove the affected area polluting clothing, rinse with soapy water and clean water.

2.Ingestion: Drink plenty of warm water, induce vomiting, seek medical attention, avoid use adrenaline.

3.Collect leaks.

4.In case of fire, dry powder, foam, carbon dioxide sand extinguishing

[Safe Storage]

Store in a cool and well ventilated place. Locked storage

[Waste Disposal]

Dispose of waste, pollutants, and empty containers in accordance with national/local regulations

National Chemical Accident Emergency Consultation Hotline:0532-83889090

Executive standard: BB/T 0047

Production date: see can bottom

Validity period: Three years . Qualified inspection